150L (40g) Heavy Duty Stainless Steel Kettles with Tri-Clover fittings


  • Sale
  • Regular price





These are much more heavy duty grade stainless steel kettles complete with two riveted handles and a thicker wall and a much thicker bottom than our economy kettles.  One kettle type has 3 x 1.5 inch TC fittings and the other has 1 x 1.5 inch TC fitting.  Both have 3 x 1/2 inch NPT couplers installed for temperature monitoring and whirlpool in/out. 

These would make a great 1bbl pilot system for someone brewing lots of beer or for a start up nano brewery.  The 3 TC kettle would be a great boil kettle, the 1 TC vessel would make a great HLT and you could pair it up with our 30 or 40 gallon HD kettle as a mash tun or vice versa.

We currently have 2 types in stock:

150L with 3 x 1.5 inch TC fittings (one on one side and 1 on the other) and 3 x 1/2 inch NPT couplers welded into the kettle.  In the pictures the single TC fitting with the 1/2 inch coupler over it is considered the front of the kettle and 2 vertical TC fittings and the offset 1/2 inch coupler is considered the back.

Specs:
OD: 22.5 inches
ID: 21 inches
OD (including handles): 25.5 inches
Height of kettle: 27.75 inches
Height with lid: 30 inches

150L with 1 x 1.5 inch TC fitting and 3 x 1/2 inch NPT couplers welded into the kettle. In the pictures the single TC fitting with the 1/2 inch coupler over it is considered the front of the kettle and the image without any TC fittings but with the offset 1/2 inch coupler is considered the back.

Specs:
OD: 22.5 inches
ID: 21 inches
OD (including handles): 25.5 inches
Height of kettle: 27.75 inches
Height with lid: 30 inches